gO Measurement-System User Manual
5 / 8
green
TEG
AG
Technoparkstrasse 1
8005 Zürich, Switzerland
T: +41 44 632 04 20
F: +41 44 633 13 68
greenTEG.com
4. Online Tool
Analysis and monitoring of the data on:
http://goms.greenteg.com
1.
First Login
During the first login you are asked to change your password. Use the login which was sent to you with delivery and follow
the three steps shown below (see Fig. 5).
1.
Figure 5: Screens for first login
2.
3.
2. Online tool main views
2.1 Dashboard
The online tool has two important pages. The first page is the Dashboard where one can see the live measurement data for
the base station and the nodes that are currently connected. It helps you to check if the nodes are connected and measuring.
In the Dashboard one can also see the battery level and the signal strength of the nodes and the base station. Specifically,
the signal strength percentage of the nodes refers to the signal strength between the node and the base station and has to
be above 25% (otherwise data might get lost), whereas the signal strength percentage for the base station represents the
cellular (2G/3G) signal and has to be roughly above 50%.
Figure 6: Live View
2.2 Report
