13
Intelligent Radar Level
Transmitter
Programming Menu
-
RD1830 series
Greentech, Korea
www.greentechkor.com E-mail: [email protected]
RESET 4.3
SELECTING RESET
Press button OK to enter the reset selection menu, select the
corresponding reset function item for resetting according to the needs.
4.4. Measuring
unit:
There are two choices of measuring units for users, one is the metric
system, the other is imperial system. When LCD indicates menu number
4.3, press button SELECTION to enter measuring unit setting menu, LCD
indicates as follows:
MEASURING UNIT 4.4
M (d)
Press button OK to enter the measuring unit selection menu, select the
unit according to the needs.
4.5. Language:
There are four choices of languages for users, they are Chinese, English,
French and Italian.
When LCD indicates measuring unit menu number 4.4, press button
SELECTION to enter language setting, and LCD indicates as follows:
LANGUAGE 4.5
ENGLISH
Press button OK for entering the languages selection menu and select the
language you need.
4.6. HART mode:
When two or more than two instruments are connected to a computer with
HART communication interface, use this function to set the instrument into
multiple working mode. When LCD indicates language menu number 4.5,
press button SELECTION to enter working mode menu. LCD indicates as
follows:
HART WORKING MODE 4.6
STANDARD
ADDRESS
0
Press button OK to enter HART working mode setting interface, LCD
indicates as follows:
HART WORKING MODE 4.6
STANDARD MULTIPLE
Press button SELECTION to select standard or multiple working modes.
The address of the instrument is “0” when select standard working mode.
When select HART working mode as multiple, LCD indicates as follows:
HART WORKING MODE 4.6
ADDRESS 0
POWER SUPPLY 4mA
The address can be changed from 1-15. Working current 4mA and 8mA
can be selected. Press button OK for confirmation.
4.7. Copy sensor
data:
copy sensor data, there are two submenus: from “COPY FROM SENSOR”
to “COPY TO SENSOR”. This function is used for the safety of the
instrument parameters. When technician finish setting the instrument
parameters according to the working conditions, you can use the function
of “COPY FROM SENSOR” to protect or save the set parameters.
Once the parameters are altered accidently, you can use the function of
“COPY TO SENSOR” to recover them.
When LCD indicates HART working mode submenu number 4.6, press
button SELECTION to enter “copy sensor data functions”. LCD indicates
as follows:
COPY SENSOR DATA 4.7
COPY TO SENSOR?
