10
OPERATIONS
How it works
The water first travels from your tap through a USA Made NSF-Certified Carbon filter where
impurities like chlorine are removed from your tap water.
After the impurities are filtered out, the water then travels through platinum coated
Japanese made titanium plates where the water molecules are separated by an electric
charge. This is a process called electrolysis.
Upon selecting the desired level of alkalinity on the front of the unit, the alkaline water is
then dispersed from the outlet and the byproduct flows out of the drain tube.
How to Use
Once you have completed installation of your Alkaline XT Water Ionizer and it is plugged
into a power outlet you can begin to use your machine.
First, press the button of your desired (e.g. “Alkaline 1”). [When just beginning an alkaline
drinking water regimen, it is recommended to use Alkaline 1 for the first week and then
gradually progress to Alkaline 3].
After choosing your desired level of pH, turn the tap on to about ¾ maximum water flow.
The display will light up. Let the water run on the selected level for about 10 seconds
before filling your glass or container.
When finished, simply turn the tap off. The unit will revert back to the default Alkaline 3 setting.
Summary of Contents for Pure Water ALKALINE Ti
Page 1: ...Owner s Manual ALKALINE XT...
Page 16: ......
