6
Cleaning the Unit
Filter
Unit
1. Begin by unplugging the unit from the receptacle.
2. Remove the FILTER COVER from the REAR of the unit. Use a FLAT HEAD
SCREWDRIVER to get behind the FILTER COVER and pop it off. There will be a
strong resistance but it will come off without problem.
3. Remove and clean the FILTER and FILTER COVER by vacuuming or wiping them
down with a damp cloth.
4. Clean the grille behind the FILTER using a damp cloth as well.
5. Replace the FILTER and FILTER COVER once cleaning is complete.
1. Begin by unplugging the unit from the receptacle.
2. Remove the SCREWS from each of the SIDE PANELS and store them in a safe
place before removing the UNIT COVER.
3. Use a can of compressed air to remove any dust or debris from the unit’s insides.
4. Wipe the inside of the UNIT COVER down with a damp cloth.
5. Place the UNIT COVER back into position and replace the SCREWS on each of the
SIDE PANELS.
NOTE: The REAR FILTER ASSEMBLY and CORONA DISCHARGE PLATE are the
only parts of the unit that are user-serviceable. Any other tampering with
the unit by non-certified persons will void the warranty.
WARNING: Make sure to unplug the unit before any maintenance or
cleaning is done.
Occasionally, the REAR FILTER ASSEMBLY should be cleaned in order to optimize the flow
of air through the unit. Follow these instructions to properly clean the REAR FILTER.
The unit will need to be cleaned inside from time to time as well. Be sure to use extreme
caution when doing this in order to avoid any damage to the unit or harm to yourself.
