GreenTec Scorpion 330-4 S, Handbook

Page: 84 / 95

84
Scorpion 4, 6 and 8
•
During maintenance, you can often come into contact with
hydraulic oil, gearbox oil and grease. Always avoid skin contact,
inhalation, etc. Always use the correct protective equipment.
Always be familiar with how the chemicals are handled. Be
familiar with the safety data sheets of the products used.
Daily/routine inspection (e)
Always remember to check all machinery, including the tools carried
by the machine. It is important that the user knows the machines and
performs the necessary inspections on the vehicle, boom mower and the tools used.
For inspection of the tools, use the instruction manuals for the respective machines and
be sure that their daily routines are performed before start-up and already again after 3-
5 operating hours.
Here, extra attention should be paid to loose bolts .
Table 5 - Daily inspection of the entire machine before start-up
Table 6 - Half-yearly inspection, preventive maintenance
Table 5 - Daily inspection of the entire machine before start-up
After the first 3-5
hours .
After that - daily . General assessment :
•
Intact guardings
•
Cracks in frame
•
Loose parts or missing bolts
•
Dents and bent parts
Inspect hydraulics for leaks from engine, fittings and hoses Check
hydraulic hoses and sleeves for proper ducting (wear marks and
displaced sleeves )
Check the oil level (both gearbox and hydraulics) on the tool
carrier and on the vehicle .
Lubrication of all lubrication points
Half-yearly inspection, preventive maintenance
After
winter/summer
season Carefully inspect the condition of all the hoses Pay particular
attention that they do not rub against edges, side pieces, bolts,
etc., and that the hose sleeves are properly placed so the hoses
are always protected as good as possible
Clean the entire machine for branches and loose bits, wash, and
oil it with anti-corrosion oils (especially in the areas that are
polished with use)
Carry out a meticulous daily inspection
Store the machine in a well-protected, dry place