4
Dismount the pin with the handle
Swing the arm out and around.
The breakback cylinder is placed behind the arm. The cylinder is swung out and around, after which it is mounted
on the arm with the pinl, which has just been dismounted. The middle hole MUST be used as the saw, blades
must point forward. The other holes are for another position on the arm when using other tools.
Extend the hydraulic cylinder for the angle adjustment to its full
length.
Completion
Now the HFX tool carrier is ready to mount the tools.Use the tools user manual or quick
guide for mounting of the tool.
REMEMBER all user manuals are on Greentec homepage
documentation.
Electric-hydraulic control: Connect the
power, switch on the control on the left
switch, and activate the cylinder with the
right switch. The middle switch switches the
tool on/off. The switch must be pulled
outwards to be activated (child safety lock).
