1
HXF Quick start.
This Quick Start shows and describes how to unpack and mount an HXF tool carrier on a
front loader, and then how to mount a tool on the HXF.
Please remember, this Quick Start does not replace the user manual.
Always carefully read the user manual.
The following sections will show step by step images with explanations:
Unpacking
Picking-up the HXF on the front loader.
Connecting hoses and any cables
Preparing the HXF for the mounting of the tool
Completion
The mounting of the HXF tool carrier and saw must be carried out safely and wisely.
•
Make sure that the tractor and the front loader can carry the HXF and
the LRS saw in a safe and stable way, even if the saw hangs on the
side.
•
Assembly must only be carried out on a flat and firm surface, with
ample space so that the tractor and the tools can be freely
manoeuvred without risk of getting caught.
Unpacking
Unpacking: Gently cut-off the plastic, take care not to cut hoses and not to scratch the varnish
All loose parts of the HXF and the saw are packed into the HXF or bolted/tied onto the pallet.
