HXF 2800 / 2802 AHS
23
Maintenance
Lubrication
Washing your machine
Grease all your machine and optional parts after each time you wash your machine.
Hydraulic Hoses
•
Carefully check condition of all hoses during routine service paying particular attention to
chafed outer casing. Secure wrap with waterproof adhesive tape to stop the metal braid from
rusting
•
Daily inspect all hydraulic hoses and fittings to be in good order. Any damages or leaks must
be rectified immediately; this is part of the daily maintenance and is your responsibility, to
unsure a long reliable working life
•
Hoses with damaged metal braid should be replaced. When replacing hoses quote number
stamped on fitting at one end. The GreenTec hydraulic system works at very high pressure,
when replacing hoses use only genuine hoses, a burst hose could be very dangerous.
•
When replacing hoses to avoid twisting fitting, use two spanners to slacken and tighten
•
Always check the black protective sleeve is in good order, to replace sleeve is far cheaper
than replacing expensive hoses.
•
Hose warranty is limited to replacement of hoses due to faulty materials or manufacture
Warranty will not be considered on hoses damaged by chafing, abrasion, cuts or pinching
while in work, or to damaged threads due to over tightening.
Warning
Hose is weakened when installed in twisted position. Also, pressure pulses in twisted
hose tend to fatigue wire and loosen fitting connections. Design so
that machine
motion produces bending rather than torsion
.
Summary of Contents for HXF 2800
Page 1: ......
Page 20: ...HXF 2800 2802 AHS 20 Diagrams Splitter Valve...