background image

 

HXF 2800 / 2802 AHS 

9

 

 

Factors that affect stability 

  Centre of gravity of the tractor/machine combination. 

  Geometric conditions, e.g. position of the cutting head and ballast. 

  Weight, track width and wheelbase of the tractor. 

  Acceleration, braking, turning and the relative position of the cutting head during 

these operations. 

  Ground conditions, e.g. slope, grip, load capability of the soil/surface. 

  Rigidity of implement mounting. 

 

 

Suggestions to increase stability 

  Increasing rear wheel track; a vehicle with a wider wheel track is more stable. 

  Ballasting the wheel; it is preferable to use external weights but liquid can be 

added to around 75% of the tyre volume – water with anti-freeze or the heavier 
Calcium Chloride alternative can be used. 

  Addition of weights – care should be taken in selecting the location of the 

weights to ensure they are added to a position that offers the greatest 
advantage. 

  Front axle locking (check with tractor manufacturer). 

 
 

 

NOTE: The advice above is offered as a guide for stability only and is not a guide to vehicle strength. It 
is recommended that you consult your vehicle manufacturer or local dealer to obtain specific advice on 
this subject, additionally advice should be sought from a tyre specialist with regard to tyre pressures 
and ratings suitable for the type and nature of the machine you intend to fit. 

 

 Attachment of the machine must be performed in a safe location on a firm 

level site. 
Care should be adopted at all times when handling or manoeuvring the machine during the 
attachment procedure; ensure all persons remain clear of the cutting blades which possess 
the potential to cause injury even when stationary. For reasons of safety the blade guard 
should be fitted to machine at all times and only removed for machine operation. 

 

 

Summary of Contents for HXF 2800




























Reviews: