GreenTec HXF 2302, Handbook

Page: 11 / 44

GreenTec
HXF 2302 11
Factors that affect stability

Centre of gravity of the tractor/machine combination.

Geometric conditions, e.g. position of the cutting head and ballast.

Weight, track width and wheelbase of the tractor.

Acceleration, braking, turning and the relative position of the cutting head
during these operations.

Ground conditions, e.g. slope, grip, load capability of the soil/surface.

Rigidity of implement mounting.
Suggestions to increase stability

Increasing rear wheel track; a vehicle with a wider wheel track is more
stable.

Ballasting the wheel; it is preferable to use external weights but liquid can
be added to around 75% of the tyre volume – water with anti-freeze or the
heavier Calcium Chloride alternative can be used.

Addition of weights – care should be taken in selecting the location of the
weights to ensure they are added to a position that offers the greatest
advantage.

Front axle locking (check with tractor manufacturer).
NOTE: The advice above is offered as a guide for stability only and is not a guide to vehicle
strength. It is recommended that you consult your vehicle manufacturer or local dealer to obtain
specific advice on this subject, additionally advice should be sought from a tyre specialist with
regard to tyre pressures and ratings suitable for the type and nature of the machine you intend
to fit.