Usage
7
Manual CAS 200
EN
Place filter 1 (activated carbon & cold catalyst compound filter) back into the
inner side of the product.
Note: Please ensure the tab side is facing you.
Make sure the filters are installed in the right position. Turn the buckles to
fasten the filters.
To install the front panel, place the top into the host buckle and close the
front panel. The front plate will be held by built-in magnets.
Positioning
This device must be placed on a dry, stable and flat surface.
Position the device in such a way that it is not touching any walls. Leave a minimum of
20 cm of free space around
the device and a minimum of
30 cm free space above
the device. Otherwise, it could lead to damage or dirt on
the wall or device.
The rear of the device must face the wall; the front must face into the room. The front of the device can be
identified by the large-scale
greentec
logo print.
Operation/control panel
Commissioning
Check the outside of the device for damage prior to every use. If you notice damage, do not switch on the device
and contact the responsible retailer or manufacturer.
Once the device has been set up as described in the previous chapter, you may switch it on.
Display panel
Control panel
