NC-500 NETcat
®
Pro
Operation
Switch ON and OFF
To switch the NETcat Pro unit on, press the button for > 2 seconds.
•
To switch the unit off, press the button for > 2 seconds.
•
Factory Default Reset
To reset the unit to factory defaults, apply a long push to the button for > 5 seconds.
The reset will then initiate a touch panel calibration and zero offset calibration for all pairs.
Following this, all stored settings (i.e., NVP, language, and contrast) will be reset to factory
default settings.
Main Menu Screen
On normal power up, the unit will enter the following mode awaiting a screen selection.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
