f)
Replace the front cover of the machine by inserting the 4 screws
into the base and screwing them back in.
1.2 The Displays shows the ‘Emergency Stop’ Error Message
1.
Ensure that the emergency stop button is not depressed. If this is the
case, an
Emergency stop
error message will appear on the display
screen after the
Start
button on the display board has been pressed.
2.
To release the emergency stop button, twist it in a clockwise direction
until it pops up.
3.
If the emergency stop button is unable to be released, or if it is released
and the Emergency Stop Error message continues to be shown, then
check that the wires of the Emergency stop button are properly
connected to the PCB and the button mechanism.
Button depressed
Button released