Greenlee Textron / Subsidiary of Textron Inc.
7
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
GATOR™ Battery-powered Pressing Tool
Operation
Electrical Shock Hazard:
This tool is not insulated. When
using this unit near energized
electrical lines use proper personal
protective equipment.
Failure to observe this warning
could result in severe injury or
death.
• Do not operate tool without dies. Damage to the
ram or tool head may result.
• This tool is not designed for continuous use. After
30 – 40 pressing cycles, allow the tool to cool for
15 minutes.
• Do not place tool in a vise. The tool is designed
for hand-held operation.
• Keep water from inside of tool. Water inside tool
or battery may damage internal circuitry.
• Use this tool for manufacturer’s intended purpose
only. Use other than that which is described in
this manual can result in injury or property
damage.
Failure to observe these precautions can result in
injury and property damage.
• Keep hands and fingers away
from closing dies.
• Lock trigger when not in use.
Wear eye protection when using
this tool.
Failure to wear eye protection can
result in serious eye injury from
flying debris or hydraulic oil.
