SG4-854 Shotgun Shoe Group for 854DX Electric Bender
Greenlee Tools, Inc.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
6
Setup
Always use safety glasses. Everyday
glasses only have impact resistant
lenses; they are NOT safety glasses.
When using in dusty environment, use
face or dust mask.
Failure to wear eye protection could
result in serious eye injury from flying
debris.
Unplug the bender before changing accessories.
Accidental start-up could result in serious injury.
INSTALLING THE ROLLER SUPPORT
1. Grab the roller support with two hands as described
below.
Use right hand
to grap rollers
and hold the
roller support
open as shown.
Use left hand
to grab the
bottom portion
of the support.
2. Align the right plate of the support with the bender
roller plate as shown in the steps below.
Step 1:
This bender roller
plate should be on
the inside of the
roller support.
This plate from the
roller support should
be on the outside of
the bender roller plate.
Step 2:
Step 3:
:
