background image

Greenlee Tools, Inc.

5

Reel-X

 Fish Tape

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

Identification and Illustration

Components

1.  Front Housing
2.  Rear Housing
3.  Reel Cartridge
4.  Pulling Eye
5.  Fish Tape Material
6.  Storage Lock
7. Screws

Specifications

Fish Tape Material Specifications

Unit Specifications

Catalog Number Material Type Diameter

Length

Tensile Strength

Housing Diameter

Housing Thickness

Weight

FTXF-50

Fiberglass

11/64 in (4.4 mm)

50 ft (15.2 m)

300 lbs (1.3 kN)

12.8 in (325 mm)

2.5 in (64 mm)

3.5 lbs (1.6 kg)

FTXF-100

Fiberglass

11/64 in (4.4 mm)

100 ft (30.5 m)

300 lbs (1.3 kN)

12.8 in (325 mm)

2.5 in (64 mm)

4.2 lbs (1.9 kg)

Features

A. Primary Exit: 

•  Traditional exit allows for ambidextrous use of the 

case at any orientation or angle

B. Secondary Exit: 

•  Set your case on the ground to free up both hands 

while feeding into conduit or pulling

C. Storage Lock 

•  Keeps the fish tape contained within the case 

during transport

D. Textured Grip

•  Ribbing along the edge of the case allows you to 

hold it securely at any angle

E. Quick-Change Reel Cartridge

 

•  Inner reel spins freely to reduce tape friction, 

speeding up your pull 

•  Eliminates binding and overcomes kinks 
•  2x Faster (when compared with a traditional  

fish tape)

Benefits

Maximum Comfort & Ergonomics 

•  Reduce fatigue with lower forces needed to feed  

& pull tape  

•  Decrease discomfort during use with a case that 

promotes neutral arm & wrist positions

•  Minimize strain with a case designed to encourage 

holding it closer to your body

Speed & Versatility

•  Swap-out reel cartridges to quickly replace tape
•  Case opens easily to access reel and remove any 

dirt & debris

•  Case designed to fit all users and most  

fishing environments

•  Fish faster when you hold the case between your 

legs or set it on the ground to free up both hands

2.

1.

6.

3., 

E.

4.

5.

7.

figure 1

 

 

B.

C.

D.

A.

Summary of Contents for Reel-X FTXF-100












Reviews: