background image

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

8

HRD-1 and HRD-58 Hydraulic Ground Rod Drivers

Specifications 

(cont’d)

Recommended Hydraulic Fluid

Viscosity

Ideal ..................................................... 20 to 40 cSt
Allowable .......................................... 15 to 1000 cSt

Viscosity Index ...............................................Min. 100
Standard mineral or synthetic oil can be used.

When the tool works continuously, the oil temperature 

will steady at a certain level called the oil working 

temperature. Depending on the nature of the job and  

the cooling capacity of the system, the oil working 

temperature will be 20 °C to 40 °C (68 °F to 104 °F) 

above the air temperature. At working temperature, 

the oil viscosity must be within the ideal area. The 

tool may not be operated if the oil viscosity is not 

within the allowable area or if the temperature is not 

within –20 °C to 70 °C (–4 °F to 158 °F).
The viscosity index expresses the dependence of the 

viscosity on the temperature. Thus, a high viscosity 

index is preferable so that the oil can be used within  

a wide temperature interval.

TYPE OF OIL

Viscosity

at 40 °C

(104 °F)

BP Biohyd 32

36.0 cSt

BP Biohyd 46

44.0 cSt

BP Biohyd SE 46

46.0 cSt

BP Biohyd SE 68

72.2 cSt

CASTROL Biotech HTG 32

36.8 cSt

MOBIL EAL 224 H 

36.0 cSt

Q8 Holbein 46

48.4 cSt

SHELL Naturelle HF

35.0 cSt

STATOIL M 32-68

47.4 cSt

SHELL Tellus oil T46

46.0 cSt

ESSO Univis N46

45.7 cSt

TEXACO Rando oil HDZ46

51.0 cSt

MOBIL DTE 15

44.9 cSt

Permitted oil temperature

Recommended oil temperature

(–4 °F)

–20 °C

(14 °F)

–10 °C

(32 °F)

0 °C

(50 °F)

10 °C

(68 °F)

20 °C

(86 °F)

30 °C

(104 °F)

40 °C

(140 °F)

60 °C

(158 °F)

70 °C

(122 °F)

50 °C

Applicable Oil Types

Summary of Contents for HRD-1





















Reviews: