manualshive.com logo in svg

Greenlee GATOR EK06AT, Instruction Manual

Share
Download
Greenlee GATOR EK06AT Instruction Manual Download Page 6

Greenlee Textron / Subsidiary of Textron Inc.

6

4455 Boeing Dr., Rockford, IL 61109-2988  815/397-7070

EK06AT and EK06ATC

Crimping Tool

Length ......................................................................................... 355 mm (14")

Width .......................................................................................... 355 mm (14")

Height ............................................................................................. 76 mm (3")

Mass/Weight (with battery) .............................................. 5.03 kg (11 lbs 1 oz)

Sound Level .................................................................... 75 dB (A) at 1 Meter

Vibration ................................................................................. (< or >) 2.5 m/s

2

Motor Type .......................................... Direct-Current Permanent Field Motor

Motor Voltage ...................................................................................... 12 VDC

Hydraulic Oil ........................................................ ml (pint) of Shell Tellus T15

Crimping Capacities

Cable Size (Aluminum or Copper) .................................  (#8 AWG - 500 MCM)

Crimping Force ....................................................................... 55 kN (6.2 tons)

Crimping Time ................................................................................  7 Seconds

Crimps per Charge ...................................................Approximately 40/charge

Battery

Charging Voltage ...................................................................................... 12 V

Charging Time ....................................................................................... 1 Hour

Specifications

Summary of Contents for GATOR EK06AT



















Reviews:

No comments

Brands by name

Popular brands

Load more brands