H6400C Reversible Drill
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
8
Hoses and Fittings
Installation and Maintenance
See publication 99930323, SAE J1273
(Hose and Hose Assemblies)
Replacement
Refer to a Greenlee Utility catalog or bulletin 99910322
for a complete selection of hoses and fittings.
Hose Connections
Connecting Hoses
1. Move the flow lever on the power source to the OFF
position.
2. Stop the hydraulic power source.
3. Connect the tank hose to the tank (or return) port on
the power source, and then to the tank port on the
tool.
4. Connect the pressure hose to the pressure port on
the tool, and then to the pressure (or supply) port on
the power source.
Disconnecting Hoses
1. Move the flow lever on the power source to the OFF
position.
2. Stop the hydraulic power source.
3. Disconnect the pressure hose from the power
source, and then from the tool.
4. Disconnect the tank hose from the tool, and then
from the power source.
5. Install dust caps over the ports to prevent
contamination.
Typical Setup
Setup
1. Stop the hydraulic power source.
2. Install a drill bit according to the instructions under
“Installing and Removing Accessories.”
3. Connect the hydraulic hoses according to the
instructions under “Hose Connections.”
