Greenlee Textron / Subsidiary of Textron Inc.
14
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
555
®
Deluxe Electric Bender
X Table
CENTER-TO-CENTER DISTANCE = OFFSET HEIGHT x MULTIPLIER
OFFSET ANGLE
10
°
15
°
22-1/2
°
30
°
45
°
MULTIPLIER
5.8
3.9
2.6
2.0
1.4
Figures are approximate
CONDUIT SIZE
1/2
3/4
1
1-1/4
1-1/2
2
“X”
3-1/16
3-1/16
3-3/16
4
4-1/4
4-1/2
Figures are approximate
Bending Instructions (cont’d)
Offsets
1.
Measure the height and length of the obstruction.
Select the angle to be used.
2.
See the Offset Table. The height of the obstruction
must be equal to or greater than the minimum
offset.
3.
Refer to the X Table to find the X dimension. Refer
to the Offset Table to find the center-to-center
distance.
Note: If the center-to-center distance is not shown,
calculate it by using the multipliers shown in the
Offset Table.
4.
Mark the conduit as shown.
5.
Insert the conduit into the bender. Align Mark 1 with
the front edge of the hook and bend the conduit.
6.
Align Mark 2 with the front edge of the hook.
Without removing the conduit from the bender,
rotate the conduit 180
°
. Make the second bend.
LENGTH
HEIGHT
LENGTH
MARK 1
MARK 2
CENTER TO CENTER
DISTANCE
X
OBSTRUCTION
Offset Table
2
4
6
8
10
12
14
16
18
20
22
3/4
1-1/2
2
7-3/4
15-7/16
23-3/16
30-15/16
38-5/8
46-3/8
54-1/16
61-13/16
69-9/16
77-1/4
85
3/4
1
1-1/2
2
8
12
16
20
24
28
32
36
40
44
1/2
1
1-1/4
1-1/2
2
8-1/2
11-5/16
14-1/8
16-15/16
10-13/16
22-5/8
25-7/16
28-1/4
31-1/8
15
°
30
°
45
°
OFFSET
➤
Max Conduit Size
Center-to-Center
Max Conduit Size
Center-to-Center
Max Conduit Size
Center-to-Center