background image

2

Energy Core Ventilator

®

Unit Overview

Summer Operation

Outdoor air is preconditioned (temperature and moisture 
levels are decreased) by the transfer of energy from the 
cooler, drier return air through the energy recovery core. 
The preconditioned air is typically mixed with return air 
going back to the air handler for final conditioning.

Winter Operation

Outdoor air is preconditioned (temperature and moisture 
levels are increased) by the transfer of energy from 
the warmer, more humid return air through the energy 
recovery core. The preconditioned air is typically 
mixed with return air going back to the air handler for 
final conditioning.

Table of Contents

General Safety Information  . . . . . . . . . . . . . . 1
Unit Overview  . . . . . . . . . . . . . . . . . . . . . 2
Receiving, Handling, Storage . . . . . . . . . . . . . 3
Dimensional Data and Weights  . . . . . . . . . . . . 4
Service Clearances and Access Panel Locations . . . 4
Intake and Discharge Locations . . . . . . . . . . . . 5
Installation . . . . . . . . . . . . . . . . . . . . . . . 6
Electrical Connections .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 8
Wiring Schematics .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 9
System Start-Up .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  10
Routine Maintenance  . . . . . . . . . . . . . . . . 12
Standard Components.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 13
Troubleshooting . . . . . . . . . . . . . . . . . . . 14
Maintenance Log.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 15
Our Commitment.   .   .   .   .   .   .   .   .   .   .   .   .   .   . Backcover

Outdoor Air

95°F

102 grains/lb.

Return Air

75°F

50% RH

Supply Air

82°F

87 grains/lb.

Exhaust Air

Outdoor Air

-13°F

1 grains/lb.

Exhaust Air

Return Air

72 °F

50% RH

Supply Air

40°F

20 grains/lb.

Summary of Contents for ECV

















Reviews: