48
IDENTIFICAZIONE E SOLUZIONE DEI PROBLEMI
Le saldatrici si fabbricano e si regolano in fabbrica. È proibito modificare l’impianto.
La tabella include alcuni dei problemi più comuni, le loro cause e i rimedi.
PROBLEMA
CAUSA
SOLUZIONE
Spegne l’interruttore ma la luce non
si accende
Interruttore danneggiato
Cambiare
Fusibile danneggiato
Cambiare
Alimentazione non funziona
Cambiare
Dopo la saldatura la macchina
si surriscalda e il ventilatore non
funziona
Ventilatore danneggiato
Cambiare
Il cavo è debole
Stringere il cavo
Preme l’interruttore
della torcia ma non
c’è fuoriuscita di gas
Non c’è gas
di uscita
Non c’è gas nella bombola
Cambiare
Perdite nel tubo del gas
Cambiare
Valvola elettromagnetica danneggiata
Cambiare
Perdita di gas
Interruttore danneggiato
Riparare l’interruttore
Circuito di controllo danneggiato
Controllare il pannello
Alimentatore del
cavo non funziona
La bobina del
filo non ruota
Motore danneggiato
Controllare e cambiare
Circuito di controllo danneggiato
Controllare il pannello
La ruota c’è o il cavo pattina
Stringa con forza
La ruota non si adatta con il diametro del
cavo della saldatrice
Cambi la ruota
Bobina del cavo danneggiata
Sostituire
Tubo dell’alimentazione del cavo
bloccato
Riparare o cambiare
Punta ostruita dovuto a schizzi
Riparare o cambiare
Non c’è potenza dell’arco né
tensione di uscita
Cavo di uscita connesso male o debole
Colleghi correttamente o
stringa
NOTA:
Se non si riesce a risolvere il problema, contattare il Servizio Tecnico Ufficiale.