Greencut JET-2600SX, Instruction Manual

Page: 79 / 108

79
EN
1. Assemble the high-pressure hoses, lance and fittings into the required configuration.
2. Attach a nozzle to the end of the lance extension.
3. Connect the high-pressure hose to the pump outlet connector.
4. Connect the machine to the water supply and turn the water supply ON.
5. Squeeze the lance trigger and allow any air in the hoses and pump to be ejected by the water supply
pressure. The water should flow freely before starting the engine.
6. Start the engine.
USING THE LANCE
The lance has a “trigger” (A) to start and stop spraying. The lance may feature a “lock” (B) that prevents the trigger
accidentally being pulled. To spray, release the lock (if fitted or engaged) and pull the trigger – the spray action will
continue while the trigger remains pulled. Release the trigger to stop the spray action.
MAINTENANCE
Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION: Make sure the engine is completely shut down before performing any maintenance
or repair. This will eliminate any potential risk.
MAINTENANCE EVERY USE
FIRST MONTH
OR 20H. USE
EVERY 3
MONTHS OR
50H. USE
EVERY 6
MONTHS OR
100H. USE
EVERY YEAR OR
300H. USE
Oil level Check
Oil change Check Perform
Air filter
Check Replace
Spark plug
Clean or
Replace
Clean or
Replace
Fuel supply pipe
Replace
Exhaust valve Check
Combustion chamber Check
Idle Check
Bolts
Check
Fuel tank Drain and clean
Fuel filter Clean or Replace
A
B