Greencut GTC300XE, Instruction Manual

Page: 86 / 112

86
MAINTENANCE
Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION: Make sure the engine is completely shut down before performing any maintenance
or repair. This will eliminate any potential risk.
NOTE: During the first 50 hours of machine operation, do not perform excessively hard work.
NOTE: The frequency of cleaning of the air filter depends on the environmental conditions in which
the machine has been used, and it is recommended not to exceed 8 hours of work. The air filter
must be moistened with engine oil up to the line indicated on the air filter container.
MANTENIMIENTO EACH USE
EVERY
MONTH OR
24H USE
EVERY 3
MONTHS
OR 50H USE
EVERY 6
MONTHS
OR 100H
USE
EVERY YEAR
OR 300H
USE
Belt tension
Check X
Change X
Engine oil
Check level X
Change X X
Air filter
Check
X
Clean
X
Replace X
Transmission
wheel
Check X
Replace X
Wheel pressure Check X
Shaft teeth Clean X
Half-shaft of
the wheel
Lubricate X