Greencut GM650XB, Instruction Manual

Page: 90 / 120

90
MAINTENANCE
Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION: Make sure the engine is completely shut down before performing any
maintenance or repair. This will eliminate any potential risk.
PERIODIC MAINTENANCE
MAINTENANCE
EACH
USE
EACH
MONTH OR
15H USE
EACH
3 MONTHS OR
30H USE
EACH
6 MONTHS OR
60H USE
EACH
12 MONTHS OR
100H USE
Check for loose bolts/
nuts
Check
Tighten all bolts and
nuts
Realize Replace
Fuel filter cup (if
equipped with it)
Check
Air filter
Check Clean/Replace if necessary
Fuel filter (if
equipped)
Check Replace
Spark plug
Check Replace
Cleaning/Purging the
fuel tank
Realize Replace
Fuel line Check Clean/Replace if necessary
Blades/Chain (parts
with blades)/Chain
only
Check Clean/Replace if necessary
Adjusting the idle
speed
Adjust
Motor adjustment Check
Cleaning the
combustion chamber
Check Replace
Grease bar
accessories (as
applicable)
Grease
NOTE : In harsh conditions such as high operating temperatures, higher than normal loads and dust,
service intervals must be reduced.