Remove the exhaust filter (120) (see “Exhaust Filter” in page 11).
Drain the oil.
Remove the oil filter (100).
Make sure that materials and components to be treated as special
waste have been separated from the vacuum pump.
Make sure that the vacuum pump is not contaminated with harmful
foreign material.
As declared in this manual, the latest technology is adopted, so the
used material of vacuum pump is non-hazardous.
Dispose of the used oil in compliance with applicable regulations.
Dispose of special waste in compliance with applicable regulations.
Dispose of the vacuum pump as scrap metal.
Troubleshooting
WARNING
Risk of electrical shock, risk of damage to equipment.
Electrical installation work must only be executed by qualified personnel that knows and observes the following regulations: -IEC 364 or CENELEC
HD 384 or DIN VDE 0100, respectively,
-IEC-Report 664 or DIN VDE 0110,
-BGV A2 (VBG 4) or equivalent national accident prevention regulation.
CAUTION
During operation the surface of the vacuum pump may reach temperatures of more than 70
.
℃
Risk of burns!
Let the vacuum pump cool down prior to a required contact or wear heat protection gloves.
CAUTION
Used oil, used exhaust filters and used oil filters are special waste
and must be disposed of in compliance with applicable
regulations.
CAUTION
Be ware that the spring (125) of filter may pop out when
dismantling or installing exhaust filter.
Risk of eye injury.
Wear goggles when dismantling or installing spring (125) of
exhaust filter.
