Greenberry 23810, Instructions For Use Manual

Page: 6 / 15

6
VENETO-23 - Instructions for use
II. APPLIANCE DESCRIPTION (Img.1):
A - Front protective mesh
C - Propeller
D - A nut for fastening the guard
E - Fixing lock
F - Rear protective mesh
G - Engine
H - Control panel, airflow control switch:
- „0” - device disabled
- „1” - gentle airflow
- „2” - strong airflow
I - Engine casing
J - Adjusting knob
K - Stand
L - Screw
III. ASSEMBLY
ATTENTION:
Turn the device off and unplug it before you replace/assemble any parts.
1. The back protective mesh (F) should be put at the front of the motor part (G) and fixed by screwing the
nut for fastening the guard (D) (Img.2).
2. Place the propeller (C) on the axle of the engine (Img.3).
3. Put the front protective mesh (A) to the previously fixed back protective mesh in such a way as to make
their edges coincide, then join the front guard with the back one by means of four snap fasteners (E)
(Img.4).
IV. INSTRUCTIONS FOR USE:
1. Set the device on a flat, stable surface. Put the plug in the wall socket.
2. Control panel: press any speed control button to turn the ventilating fan on:
„1” - gentle airflow,
„2” – for strong airflow.
IMPORTANT:
The Importer/Supplier bears no responsibility for damages resulting from
inappropriate installation, application of inappropriate components, technical
modifications and failure to comply with these instructions.