greenapple Biocheck-in, Assembly Manual

Page: 27 / 28

27
3.
ASSEMBLY MANUAL 2020
3. Additional information
3.1 Product specifications
Biocheck-in is not a medical device.
It was designed to be used in practice
but can never replace consultation
of a doctor.
The thermometer applied in Biocheck-in
was designed only for body temperature
measurements from the wrist.
Do not use this device for purposes
other than those mentioned in this
manual.
In order that the measurement result
is not distorted, it is important that you
keep steady during the measurement,
and do not touch the thermometer.
Never compare temperatures measured
with different thermometers.
Factors influencing body temperature:
Individual metabolism, dependent on
each person, age, clothing, outside
temperature, time of the day, in the
morning the body temperature is lower
and increases throughout the day
until night.
3.2 Problems & Solutions
If you want to start Biockeck-in on /
off switch and it indicates with audible
signal (beep) the start but does not
show any information on the screen,
check that the powerbank is properly
charged and or connected. If the
powerbank is switched off press
the side button to switch it on.
Check that the alcohol gel has not
condensed or evaporated because it
is unusable for a long period of time.
Do a usage trial:
If you see that’s no gel coming out,
prime the pump through the menu.
If the power bank is completely
discharged and the device is not
connected to the mains, there is a
possibility of your inner battery runs
out of power. In this situation, when
put the power bank charged the device
will not restart because the inner
battery needs to be recharged as well.
Connect the Biocheck-in directly to
the mains and wait an hour to charge
the inner battery.