www.GreenSeriesFitness.com
©June 2015
Call Toll free at (800) 269-7410
VOR-IC7000-G Revision 1.1
7
Step 4-5: Handlebar & Stem
1. Insert Stem (#20) into main frame of the bike.
2. Use lock lever (#18) to tighten.
3. Insert (1) Stem/Post Slider locking tab onto the top of the Stem (#20).
4. Attach (1) (#74) Handlebar (front) End Cap and (1) (#75) Handlebar (rear) End Cap
to Handlebar Frame (#11). Ensure that the endcaps are fully seated into the handlebar
frame.
5. Attach Handlebar (#11) onto Handlebar Slider (#13) using (4) bolts (#5) and (1) Handlebar
and Slider fix Plate (#4).
6. Attach the Lock Lever (#12) onto the Handlebar Slider (#13). Slide the Handlebar
assembly until you reach the desired position.
7. Use Lock Lever (#12) to tighten and secure the selected position.
8. Place the Handlebar-stem assembly into the front tube and adjust to your ideal position.
9. Using Lock Lever (#18), tighten and secure to desired position.
NOTE:
Do not rise above the safety line.
Step 6-7: Saddle & Seat Post
1. Insert seat post (#15) into frame's seat tube, assembly saddle (#17) on saddle top slider
(#16).
2. Adjust slider using lock lever (#12) for forwards or backwards, and then tighten until reach
the proper position. Using lock lever (#18) adjusts seat post (#15) and tighten to secure
proper position.
.
STEP 5
NOTE:
Do not rise
above the safety line.
