LiAir
22
0N User Guide • GreenValley International Inc.
Page 16
Figure 7. Size of Antenna
Set up the GNSS Base Station as soon as site inspection is completed, and
Home Location has been identified. Once Base Station data recording has
started, it is necessary to not stop data collection or move the GNSS
antenna for the duration of the LiAir 220N mission.
3.3 LiAir 220N Setup and Operation (DJI M300)
1.
Attach LiAir 220N main payload to the DJI M300/RTK system.
2.
Power on the M300/RTK
3.
Press ON/OFF button:
-
Hold the ON/OFF button for 2-3 seconds
-
If the light status is flashing red, the system is initializing;
-
If the light status flickers slowly red, the system components are synchronizing;
-
If the light status is solid red, system initialization and synchronization have completed
successfully.
4.
Connect a Ground Control computer to LiAir 220N system via Network Cable
-
When connecting a Ground Control Computer to the LiAir 220N system for the first time
follow this procedure to set up the Ethernet Connection:
