Page 9
CIP1000 User's Handbook
S
ECTION A: GENERAL INFORMATION
In case the machine is driven by an electric motor, connect the cable using
extensions of less than 20 meters in length, provided with plugs having the same
features as the one delivered with the machine.
Absolutely avoid connections with cables lacking in the earth wire or whose
section gauge is lower than 2 mm2 (each wire).
Always avoid to use misrepaired cable extensions as e.g. insulating tape in
connection with joints and/or sockets or plugs.
In case the machine is driven by an explosion engine, always check, before
starting up the machine, the level of oil and fuel, and carry out all the steps listed
in the Use and Maintenance Handbook, as specified under Section C of this
Manual.
When checking the fuel level and during the tank filling up, do not smoke
and avoid to light fires.
The machines driven by explosion engine should not be used in closed rooms,
to prevent the machine operator or other people standing in the room from the risk of
poisoning or lung disease.
The pictograms and figures used on the machine are shown below.
READ THE USER'S HANDBOOK
NEVER REMOVE SAFETY GUARDS
AWAIT ALL ROTATING PARTES ARE
STILL BEFOR CARRYNING OUT ANY
SERVICING OPERATION
CAUTION! ROTATING PARTS
BEFORE STARTING ANY MAITENANCE
OPERATION, DISCONNET THE STARTER
OR, FOR ELECTRIC MOTORS, PLUG OUT
THE POWER CABLE.
EJECTION OF PIECES
WEAR SAFETY GOGGLES, EAR-PLUGS AND GLOVESI
Summary of Contents for CIP 1000
Page 28: ...CIP1000 User s Handbook NOTES ...
Page 29: ......
