20
CLEAN UP
Maintaining maximum cleanliness of your juicer is extremely important for both your
health and the peak performance of the machine. We recommend cleaning the juicer
immediately after each use, since cleaning the machine as quickly as possible is the
easiest way to remove food particles. However, if you want to juice throughout the day
without disassembling the machine, totally remove the Outlet Adjusting Knob, place a
large bowl under both the Juice Outlet and the Pulp Discharge Outlet, turn on the
machine and pour about 16 ounces of water through the machine.
1. Stains and Mineral Deposits
Colored stains and mineral deposits on parts are normal usage signs of a product.
But to remove color stains and mineral deposits.
1) Stains
- Do not use harsh chemicals such as bleach to remove food stains from the juicer.
- You can use a 25%-50% white vinegar/water solution and soak the parts overnight.
This may be repeated if necessary.
- Juicing green honeydew or cantaloupe melons may also lighten the stains.
- Stains from juicing carrots may be removed by gently rubbing the stains with olive oil
or canola cooking oil and a paper towel.
2) Mineral Deposits
- Using Baking soda
4 tablespoon of baking Soda
2 cups(16 oz) of lukewarm water
-
Soak the parts in the solution of water and baking soda overnight to loosen the
mineral deposit and to remove the colored stains. Wash with soap and warer and
use a hard bristled brush to remove mineral deposit. Wipe with cloth to dry.
- Mineral Deposits may be removed from the tips of the Twin Gears by running soaked
almonds through the machine.
- Another excellent way to remove mineral scales is to soak those affected parts in a
pure vinegar bath overnight. This loosens the scaling and much of it can be brushed
off. This process may be repeated as necessary. The vinegar used for de-scaling
can be stored for reuse. Please label the storage bottle properly so that it is not
accidentally used in food preparation.
2. The Screen
- Hold the screen under running water while brushing the pulp residue from inside
the screen first, and then the outside of the screen.
- For pulp that has been imbedded firmly in the holes of the screen, try soaking the
screen for a couple of hours in water after brushing away as much pulp as possible.
- You may also try using the DULL side of a table knife to rub along the inner surface
of the screen and then brushing from the outside with the Cleaning Brush.
3. The Main Body(Motor Unit)
To clean the motor unit of your juicer, position the front two legs over the edge of
the sink. With either the sink top sprayer, a spray bottle filled with water, or an empty
detergent bottle filled with water and equipped with its squirt-top, spray water directly
onto the front plate of the juicer where the drive shaft, mounting peg and free wheel
gear seats to remove pulp residue. Wipe any other exterior surfaces with a damp
HELPFUL HINTS