10
2. Remove the Optional Foam Precleaner, in warm water, clean with cleaning agent;
3. Thoroughly rinse clean the Optional Foam Precleaner, until all the cleaning agent to remove, hand squeeze out excess
water (Don’t throw),then let the strainer;
4. Reinstall the Optional Foam Precleaner;
5. Reinstall the Air Cleaner Cover, and then fixed knob.
Air Cleaner Element maintenance:
To run every 25 hours Need to check whether there is no dust, whether there is loose or damaged parts,In the
mud or dust very much, inspection cycle to shorten,Each run for a year or 100 hours,The Air Cleaner Element
must be replaced.
1. Counterclockwise rotation knob,Open the air cleaner cover
(Figure 1);
2. Remove the Optional Foam Precleaner and Air Cleaner Element; NOTE: Please do not use water to clean the Air
Cleaner Element, also do not use compressed air blowing, because this can damage the Air Cleaner Element.
3. If the Air Cleaner Element is dirty, please replace with new.
4. Reinstall the Optional Foam Precleaner;
5. Reinstall the Air Cleaner Cover, and then fixed knob.
