Assembly
WARNING
Stop the engine and put the switch to “STOP” place before installing parts, ma
-
king adjustments, cleaning, or when not in use. Failure to do so could result in
possible serious personal injury.
Assembling the blower tubes
1. Screw the nozzle onto upper blower tube and
tighten securely. Check tightness after initial
run and retighten if needed.
2. Place clamp around the neck of the blower
housing outlet. Do not tighten the wing nut
yet.
3. Align the locking tab on upper blower tube
with the slot in the blower housing outlet;
push the tube into the housing. Twist to lock
into place.
4. Rotate the tube so the nozzle is pointing
upward as shown. Tighten the wing nut
securely.
5. To remove the tubes, loosen the wing nut
on the clamp. Rotate the tubes to unlock
them remove from the blower housing outlet.