Green-It 1687048 User Manual Download Page 13

  Additional safety instructions for leaf blower/vaccum

  Unpacking the machine

Carefully remove the machine from its packaging and check that you have remo-

ved all from the packaging

•  Always hold the blower in your right 

  hand, refer to the Operation Instruc

  tions in this manual.

•  Rotating impeller blades can cause 

  severe injury. Stop the engine before 

  opening the vacuum door or 

  installing/changing tubes. Do not 

  put hands or any other object into 

  the vacuum tubes while they are  

  installed on the unit.

•  To reduce the risk of injury associ-

  ated with contacting rotating parts, 

  stop the engine before installing or 

  removing attachments. Do not   

  operate without guard in place. 

  Always disconnect the spark plug 

  before performing maintenance or 

  accessing any movable parts.

•  Do not point the blower nozzle in the 

  direction of people or pets.

•  Never run the unit without the proper 

  equipment attached. When used 

  as a blower, always install the blower 

  tubes. When used as a vacuum 

  always install the vacuum tubes and 

  vacuum bag. Make sure the vacuum 

  bag is completely zipped when the 

  unit is running to avoid flying debris.

•  Avoid situations that could catch the 

  vacuum bag on fire. Do not operate 

  near an open flame. Do not vacuum 

  warm ash from fireplace, barbeque 

  pits, etc. Do not vacuum discarded 

  cigars or cigarettes unless the 

  cinders are completely cool.

•  Operate the machine only at 

  reasonable hours – not early in the 

  morning or late at night when people 

  might be disturbed;

•  Do not to operate the machine near 

  open windows.

•  Use rakes and brooms to loosen 

  debris before blowing/vacuuming;

•  Slightly dampen surfaces in dusty 

  conditions or use mister attachment;

•  Use the full blower nozzle extension 

  so the air stream can work close to 

  the ground.

  Decription

1.  On/off switch

2.   Main handle

3.   Throttle trigger

4.   Upper tube

5.   Tube locking clamp

6.   Motor

7.   Fuel tank

8.   Petrol cap 

9. Choke

10.  Air filter 

11.  Recoil starter 

12.  Spark plug 

13.   Wide sweeper nozzle 

14.   Direct nozzle

15.   Bag adapter

16.   Primer 

17.   Vacuum bag

18.   Fan cover

19.  Upper vacuum tube

20.   Lower vacuum tube

Summary of Contents for 1687048






















Reviews: