Water Monitoring System
User Manual
Page
20
of 82
Ver. 1.1 – Revision March 2022
4.1 Security and login
The WMS is equipped with three user access levels.
Level
Access
Username
Password
1
Standard access on power up guest
-
2
Service access
service
1234
3
Admin access
admin
Generated one-
time password
Figure 4.4: User access levels
Level 1 – Guest
The user can view trends, active alarms, alarm history, activate start/stop
and local/remote functions.
Level 2 – Service
Only for trained personnel.
The user can access system settings, calibration, validation and moving
average functions.
Level 3 – Admin
ATTENTION
The following may only carried out in collaboration with Green Instruments.
The user can change calibration set-points, sensor communication, sensor
setup and sensor signal scaling.
To access this level, the user must contact Green Instruments with the
information shown on the login screen. Green instruments can then
generate a one-time password that will be active for 30 minutes after login.
Figure 4.5: Admin login
