Water Monitoring System
User Manual
Page
14
of 82
Ver. 1.1 – Revision March 2022
3.
Safety
Before operating the system,
read and understand the entire user manual.
WARNING
Failure to follow the instructions can lead to serious injury or death.
Follow the instructions:
■
Ensure all power and signal cables connections are correct before
operating the water monitoring system.
■
The PAH sensor module and turbidity sensor modules use UV and IR light
that can damage eyes. Do not look directly into the lenses.
■
Avoid air in the sampling system to prevent the risk of air locks occurring,
which can trigger a flow alarm.
■
Always ensure there is positive suction pressure and keep discharge
pressure as low as possible in order to maximize pump lifetime.
■
Do not block a safety valve’s drain or outlet connection, as this will
damage components.
■
Check the safety valve to ensure it functions correctly. Follow the planned
maintenance program.
■
The system may only be installed in a safe, non-hazardous area. It must
not be used with flammable sample liquids. Non-wetted components such
as enclosures must be kept dry and clean.
WARNING
Use of unqualified, unskilled, and untrained personnel can lead to serious
injury or death.
The installation and operation of this system and associated equipment
must be carried out by skilled, and trained personnel. Green Instruments
A/S bears no responsibility for the operation of the system and associated
equipment. The correct and safe operation of this equipment depends on
proper handling, installation, operation, and maintenance.
