8
Backup recorder buttons
Playback/Up
Press this button to enter playback mode. When in playback mode, press
this button to move up in the list of videos.
Quality/Down
Press this button to switch between SD and HD recording modes. When in
playback mode, press this button to move down in the list of videos.
Start/Stop
Press this button to start or stop a recording. When viewing the playback
menu, press this button to begin playing a recording, and press it during
playback to pause the recording.
Output mode
Hold down this button to enter the SD card format menu. When in playback
mode, press this button to exit playback mode.
Using the backup recorder buttons
Starting and stopping recordings
Press Start/Stop to begin or end a recording.
Changing recording mode
The default mode is motion detection recording mode. Hold down the Start/Stop button to switch to
manual recording mode. Hold it down again to switch back to motion recording mode.
Formatting the SD card
When the device is not recording,
hold down the ‘Output mode’ button on the recorder.
Press
‘Output mode’ again to switch between ‘Confirm’ and ‘Cancel’. Press ‘Start/Stop’ to select an option.
Troubleshooting
No display from recorder
•
Try changing the output mode on the recorder.
•
Try using a different cable to connect the recorder to the TV/monitor.
•
If possible, test the power supply for the recorder.
No display from camera
•
Check the camera is set to the correct output mode or try changing the output mode using
the toggle stick on the cable coming out of the camera.
•
Try using a different cable to connect the camera to the recorder.
•
If possible, test the power supply for the camera.
Cannot record
•
Check there is a micro SD card inside the recorder, that it is inserted fully, and that it has
been formatted properly and use the recorder to format it if not.
•
If you are trying to manually record, check that the recorder is not set to motion detection
mode.
Summary of Contents for Mini HD Recorder
Page 3: ...3 Wiring diagram...
