Cat-X DVI-D Expander
8 / 10
(5) Connecting the Cat5/5e/6 cable: Plug one end of the cable to the
Transmitter's “LINK IN/OUT” port and the other end to the Transceiver's
RJ-45 “LINK IN/OUT” port. The monitor connected to the Transceiver
should now display and the “LINK” LED should turn green to indicate the
DVI signal activation. Adjust the “EQ” control for best quality DVI display.
4.4 Extending Audio Signals:
The DVI-E102T Transmitter and DVI-E102TR Transceiver are not able to extend
audio signals. Use a pair of Databay DVS-AR Audio Extenders with 4-wire
phone cable and RJ-11 connectors to extend the audio.
4.5 Install More Transceivers and Displays:
(1) Using additional DVI-E102TR Transceivers and Cat5/5e/6 cable it is
possible to extend the system almost indefinitely to remote DVI-D displays.
For a large group of cascaded Transceivers, please ensure common
grounding is maintained to minimize ground-loops and interference.
(2) A DVI-D splitter or distribution amplifier may be used at each DVI-D output
to drive additional local DVI-D displays.
