01
02
LiFePO4 Battery System for Households
LiFePO4 Battery System for Households
2. INTRODUCTION
The battery bank system mainly using Solar power in existence of the solar inverters to perform its charge
and discharge functions.
•Iron phosphate-lithium power battery
• Long 5 years warranty period
• Higher energy density, very compact design to suit the smallest household space.
• Support parallel mode connection for future expansion
• Photovoltaic system: This battery pack is designed for household photo voltaic systems.
• Battery management system (BMS): The battery packs built-in BMS monitors its operation and
prevents the battery from operating outside operation settings.
• Expandability: This battery pack can be easily expanded by adding extra battery packs in .
parallel connection.
2.2 Product Over View
2.1 Features
48V
Front view
1.1 Purpose
This manual describes the introduction, installation, operation and emergency situations of the battery bank.
Please read this manual carefully before installations and operations. Keep this manual for future reference.
1.2 Scope
This manual provides safety and installation guidelines as well as information on tools and wiring.
1.3 Safety Instructions
WARNING:
This chapter contains important safety and operating instructions. Read and keep this
manual for future reference.
1.Before connecting the the battery bank please read all instructions , safety instructions related to the battery
bank and all the relevant sections important to operate the battery bank safely.
2. CAUTION –-- To reduce risk of personal injury,. please adhere to all instructions in the user manual
3. Do not dissemble the battery. only authorized Greenbank technicians are authorized to conduct service or
repairs to the battery bank. unauthorized dissemble of the unit may result in a risk of personal injury or fire.
4. To reduce risk of electric shock, turn off the unit and disconnect all cables before attempting unit relocation.
5. CAUTION – Only qualified solar electricians can install this device with the inverter/charger .
6. For optimum operation of this battery, please follow required specs when selecting the appropriate cable size.
7. Be very cautious when working with metal tools on or around the battery. A potential risk exists if a metal tool
are electric conductors , they could cause sparks or short circuit batteries or any other electrical battery
components resulting in higher risk of battery explosion or fire.
8. Please strictly follow installation procedures.
9. To support full output load, its is recommended to use 2 or more of LB48V for inverter larger than 6KVA in
parallel connection.
10.
GROUNDING/EARTHING INSTRUCTIONS
- This System should be connected to a permanent
grounded wiring in respect to the Australian battery installation guidelines.
11. Warning!! Only qualified service persons are able to service this device.
12. Battery should be installed indoor and kept away from water, high temperature, mechanical force and
flames.
13. Do not install the battery in any environment of temperature below 0°C or over 55°C,and humidity over
80%.
14. No heavy objects to be placed on the the battery bank unless the model allow vertical stacking of multiple
battery banks
1 ABOUT THIS MANUAL
SpecialAttention: Due to the built-in protection board of the lithium battery pack is with
over-discharge protectionfunction, itis strongly recommended to stop using the load when
the battery pack is over-discharged. The battery pack cannot be repeatedly activated
for discharge. Or the battery will fail to be activated by the AC or PV activation cable
( It requires a special charging activation method), so cannot be charged. Therefore,
when the battery pack is in low power state , please charge the battery as soon as
possible when main power or solar energy is available.
1. The batteries can be connected in parallel. Series connection is not allowed.
Use in upright position only.
2. The batteries are not allowed to be connected with PWM controller for charging.
1.4 Can be connected in parallel
LB24250
