background image

User Notice

Never install the wired remote controller in 

highly humid environments 

or expose 

to 

direct

sunlight.

 Please read the manual carefully before 

installing and using 

this product.

Never 

drop,

 

shake

toss or 

frequently disassemble the wired remote controller 

or

 the wireless

 

remote controller.
Never operate the wired remote controller and the wireless remote controller with wet hands.

 

Do not remove or install the wired controller by yourself. If 

you have questions

, please contact

 

your local licensed HVAC technician.

Th

is

 wired controller is 

compatible with

 several kinds of units.

Some functions of the wired controller are not available for certain units,

IRU

 more details

 

please 

refer to the owner’s manual of unit. 

Selecting an 

unavailable function will 

do nothing

 

and will 

not 

affect unit’s operation.
The wired controller is universal. The remote receiver is either in the indoor unit or in the

 

wired 

controller. Please refer to the specific models.

When some indoor units are connected to the wired controller and the remote controller is set in 
the auto mode (where the temperature adjusts automatically), the remote controller will override 
the wired controllers auto mode setting.

Summary of Contents for XE71






















Reviews: