Gree TTW Series, Owner'S Manual

Page: 15 / 24

When this switch is disabled
For models:
26TTW09AC230V1A-T 26TTW09HC230V1A-T
26TTW12AC230V1A-T 26TTW12HC230V1A-T
26TTW09HP230V1A-T 26TTW12HP230V1A-T
26TTW09AC115V1A-T 26TTW12AC115V1A-T
26TTW09HP115V1A-T 26TTW07HP230V1A-T
26TTW09AC230V1A-T 26TTW09HC230V1A-T
26TTW12AC230V1A-T 26TTW12HC230V1A-T
26TTW09HP230V1A-T 26TTW12HP230V1A-T
26TTW09AC115V1A-T 26TTW12AC115V1A-T
26TTW09HP115V1A-T 26TTW07HP230V1A-T
For models:
(DOWN) ,the setting temp range from 61°F to 86°F. When
this switch is enabled (UP) , the setting temp range from 65°F to 86°F in cooling and 61°F
to 78°F in heating .The default setting is DOWN (disabled). Display always shows full range
Temperature limitation function
When this switch is enabled (DOWN) , an LED will light up the user interface after 250 hrs
of accumulated fan run time. It serves as a reminder to clean the filter. When this switch is
disabled (UP) , the function is disabled. The default setting is DOWN (enabled).
Filter Reminder Function
When this switch is enabled (DOWN) , it allows the indoor fan to cycle on/off with the
compressor. When this switch is disabled (UP) , it allows the indoor fan to run continuously.
The default setting is DOWN (fan cycle).
Fan Cycle/Continuous - Cool
When this switch is enabled (DOWN) , it allows the indoor fan to cycle on/off with the
heater or the compressor operation. When this switch is disabled (UP) , it allows the indoor
fan to run continuously. The default setting is DOWN (fan cycle).
Fan Cycle/Continuous - Heat
AUXILIARY CONTROLS-DIP SWITCHES
The auxiliary dip switch controls are located behind the room cabinet-as shown in this figure.
The owner is responsible for checking switches and ensuring they are in the desired position.
Filter Reminder Function
Temperature Limitation
Function
Fan Cycle/
Continuous-Cool
Fan Cycle/
Continuous-Heat
-1 2 -
24 Volt AC - Remote Thermostat
When this switch is enabled
(UP)
, it allows the unit to operate with a 24 Volt AC Remote Control Wall
Thermostat. The unit controls are disabled. The default setting is
DOWN
(disabled).
1 2 3 4 5
Fan Cycle/ ontinuous-Heat
Filter Reminder ction
Fan Cycle/ l
Temperature Limit Function
Fun
Continuous-Coo
C
ation
Class 2 - Remote Thermostat
(
61 ℉ (16
℃
) to 86 ℉ (30
℃
)
).