17
The water tray and
fi
lter will get dirt and peculiar odor, do maintain periodically.
Press to clean it with
water or warm water
(around 40
℃
)
●
Wash the
fi
lter with moderate force to avoid
deforming of the
fi
lter.
●
Wipe with soft sponge.
●
Never forcedly scrub with brush.
●
Wash with clean water thoroughly to avoid
accident or color changed.
●
The water tray could be used in wet after
maintenance.
●
Dry out the water tray and assemble it when the
unit will not be used for a long time.
When there’s peculiar smell or dirt
Press to wash with clean water or neutral abluent of
40
℃
for 30~60mins.
●
The abluent volume used should be as the
speci
fi
ed.
●
The color changed caused by abluent does not
affect the unit operation.
●
Wash the
fi
lter thoroughly after press.
Press to wash it with warm water mixed with
Citric acid (around 40
℃
) or clear water for 2h.
Using volume: 20g Citric acid mixed with 3L
water.
Please extend the press time when there’s scale.
●
Wash the
fi
lter thoroughly after press.
●
Citric acid could be bought at drug store.
Requirement
Slide along the frame (upper) arrow direction, mark
with “
△
”, remove the frame (upper) and the
fi
lter
screen.
(Press to wash the frame with clear/warm water if the frame
cannot be disassembled.)
●
Match the bulge of lower frame and
fi
lter screen hole.
(Incorrect assembly might cause water leakage)
2. Assemble the new
fi
lter screen onto the
frame (lower)
●
Both sides of the
fi
lter screen are the same.
3.Upper frame and shaft should be
assembled as original sample.
①
Match the"
△
"at upper frame (till a “click” is
heard)
②
Insert the shaft and rotate right.
●
For different environment, the dirt might be
different.
It is advised to maintain when there’s peculiar
smell or the humidifying volume decreased.
Maintenance
standard
once a month or whenever there’s
peculiar smell or dirt
Maintenance
method
press to clean
Press to clean
every square of
the
fi
lter.
Service life for
replacement
when the unit is operated
for accumulative 2000 hours
1. Remove
fi
lter screen
Do not abandon
the frame
Do not abandon
the frame (shaft)
Rotate to left until a “click”
is heard and then stop.
Frame (lower)
Frame (upper)
Filter screen
▲
Match and
assemble
Bulge
5. Filter sub-assy
6.Filter replace method
When the scale (white or brown) is hard to
clean
(The humidifying volume will be decreased if the unit is operating
with scale)