background image

10

Display Function Introduction

Display of Nixie Tube

 

(1) Ambient humidity is displayed during normal 
     operation. 
(2)Time is displayed when setting timer. 
(3) Set humidity is displayed when setting humidity.  
(4) Sensitivity degree d1, d2 or d3 of dust is displayed 
      when setting sensitivity of dust.  
(5) Sensitivity degree o1, o2 or o3 of odor is 
      displayed when setting sensitivity of odor.

Example:

Fan Speed Bar 

 

It displays current fan speed.  One column 

means silence; Three columns mean low 

fan speed; Five columns mean medium fan 

speed; Seven columns mean high speed. 

Silence

Sensitivity degree of dust

Sensitivity degree of odor

1

3

6

LED Lamp for Water Shortage 

When LED lamp for water shortage blinks, 

there is water shortage for water tank. It 

reminds user of 

fi

 lling water. 

Both conditions below must be met when LED 

lamp blinks: 

(1) Humidifying mode has been set; 

(2) Set humidity is higher than ambient humidity. 

LED Lamp for Child Lock

When child lock function is turned on, other 

buttons in the unit and remote control will be 

locked to prevent child wrongly operating the 

unit.

(1) After pressing child lock button in remote 

     control for 2 seconds, the LED lamp of 

     child lock will be on and child lock function 

     is activated. If any other button is pressed, 

     LED lamp of child lock will blinks and   

     buzzer will sound. 

(2) Press button of child lock for 2 seconds to 

     release child lock. 

Cleaning and Replacement

When LED lamp for cleaning or replacement 

is on, it reminds user of cleaning or replacing 

fi

 lter of the unit.

(1) Cleaning  When LED lamp for cleaning 

      is on, it means unit has operated for 

      continuous 480 hours. It reminds user of 

      cleaning cleanable parts of the unit, 

      such as 

fi

 lter.  In standby mode ,When   

      pressing buttons 

Sleep+Timer

, LED 

      lamp for cleaning will be off and timing    

      counter will recount time; 

(2) Replacement  When LED lamp for 

     replacement is on, it means the unit has 

     operated for continuous 2000 hours. It 

     reminds user of replacing 

fi

 lter so as to 

     keep good performances on dust 

     removal; In standby mode,When pressing 

     buttons 

Sleep+ Timer

, LED lamp for

     replacement is off and timing counter will 

     recount time. 

Low fan speed

Med. fan speed

High fan speed

Summary of Contents for SP-240A



























Reviews: