GMV5 HR Heat Recovery Cooling and Heating Mode Exchanger
9
4 Installation Instruction
4.1 Installation of Cooling and Heating Mode Exchanger
4.1.1 Dimension of Outdoor Unit and Mounting Hole Position
After the unit is installed, a maintenance port should be reserved at the electric box side of unit for
maintenance. The position of maintenance port should be lower than the lower size of unit.
The mode exchanger shall be installed near the maintenance port or air return of indoor unit. (Note:
if it is installed near the air return, please make sure not to affect air return and maintenance).
The following pictures detailedly describe the installation of maintenance port and mode exchanger:
Fig 4.1.1
Fig 4.1.2
