Gree HLR35SM/NaA-M, Service Manual

Page: 23 / 44

MODULAR MINI CHILLER CONTROL
23
User Para. Setup
System Para. Setup
completely, the following prompt will come up.
Press Up or Down button to convert between YES and NO , press Confirm for
acknowledgement, press Exit to quit the menu and go back to the previous menu.
Note: manual defrost is not allowed for two modules simultaneously. If manual defrost is
started for one module and such function is started for another module, the following prompt
will appear:
Press YES for acknowledgement.
If manual defrost is initiated for a certain module under non-manual defrost mode, the
following prompt will be present:
(3) Parameter Setup
On the Main Menu on the screen, select Parameter Setup and press Confirm to go to
the page as shown in the following drawing.
Press
Exit to quit the page and go back to the previous menu. Press Up or Down
selection button to select a needed setting interface.
a 、 User-level Parameter Set
Select the menu and confirm the selection for going to User Para. Setup menu. Press
the Up or Down selection button to select the parameter to be modified and press
Confirm to go to the modification page. Press the Up or Down selection button for
entering parameters and press Confirm or Exit to go back to the parameter set menu.
Other parameters can be modified in the same way. After entered Default
Parameter option, System will inquire whether use Default Value, if YES is choosed,
Do you need to stop
Unit under defrost?
YES NO
MOD.X is defrosting
Don’t start current
mod now!
YES NO
Please set the mode
To defrost !
OK