Z series combination household (townhouse)central air conditioning unit
12
Installation for indoor unit
L1
Nut with washer
Spring washer for nut
L2
L3
Unit: mm
Shown distance
L1
L2
L3
Distance
>250
>800
<1200
8.1.3 Carrying and disassembly
1) It is better to use forklift or crane when moving the unit.
2) When suspending, please adopt canvas gallus, round the gallus at base of the unit and bundle it tightly,
meanwhile, ensure that the gallus would not tough heat exchanger.
3) When moving the unit, the slant angle should be lower than 30 °
8.1.4 Installation mode
1) Directly fix the unit on separate concrete base with expand bolts.
2) It is also available to adopt angle iron or steel supporter that make off channel steel, add shake-
absorbing gaskets,and then place the unit on floor or roof, Ensure to keep the unit horizontally.
8.2 Installation of terminal facilities
Installation of indoor terminal fan coil should obey the installation regulation for air conditioning
facilities.
1) Suspend the fan coil according to the elevation shown on air conditioning project construction chart,
and please be aware to keep it horizontally.
2) Connect water in and out water and water in and out joint of fan coil by soft joint; connect condensate
water out pipe on water tray and condensate water drainage host by plastic host.
3) Electric wiring of fan coil, 3-speed switch and temperature control are as following:
