Operating Procedures / Photos
Press the clasps in by till they loose, then lift up
wards the electric cover.
4. Disassemble the electric cover
5. Disassemble water tray
Electric cover
5. Disassemble the electric box
Loosen the grounding wire of the evaporator, re-
move the temperature sensor for the pipe, put
out the connection lines of the step motor and the
indoor motor. Screw off the screw fixing the elec-
tric box. Remove the electric box.
Grounding wire
Connector
Tube Sensor
Clasp
Water tray
Screw
Loosen the clasps on both side of water tray and lift it upward,
then can take off the water tray sub-assy.
Note: Due to the water tray is connected with the water pipe,
please becareful to take out the water tray, do not collapse the fin
on evaporator.
