69
Installation and Maintenance
Service Manual
Step
Procedure
3.Remove display and panel
4.Remove detecting plate and electric box cover2
5.Remove front case sub-assy
6. Remove vertical louver
Panel rotation
Screws
Display
Panel
Groove
Screws that are locking the display board.
Separate the display board from the front
panel.
Open the front panel; separate the panel
rotation shaft from the groove fixing the
front panel and then removes the front
panel.
Remove the screws fixing detecting plate
and remove detecting plate.
Remove the screws on the electric box
cover to remove the electric box cover 2.
Remove the screws fixing front case.
Loosen the clasps of front case Life the
front case sub-assy upwards to remove
it.
Loosen the connection clasps between
vertical louver and bottom case to remove
vertical louver.
Remove the swing motor by screwing off the
connecting screws.
a.
b.
Screw
Screws
Electric box cover 2
Detecting plate
Clasps
Front case sub-assy
Screws
Vertical
louver
Bottom
case
Clasps
Swing motor
