Connecting Indoor and Outdoor Electric Wires
26
Installation of Indoor Unit
Fig.6
1.Open the front panel.
2.Remove the wiring cover
as shown in Fig 6.
3.Make the power connection cord pass through the hole at the back of indoor unit.
4.Reinstall the
cord anchorage
and wiring cover.
5.Reinstall the front panel.
connect and fix power connection cord to the terminal board
●
●
●
After tightening the screws, pull the wire slightly to confirm whether it's firm or not.
●
●
Make sure that all wiring connections are secure and the cover plates are reinstalled
NOTE:
All wires between indoor and outdoor units must be connected by the qualified electric
contractor.
Electric wires must be connected correctly. Improper connection may cause malfunction.
Tighten the terminal screws tightly.
Make sure that the electric connections are earthed properly to prevent electric shock.
properly. Poor installation may cause fire or
electric shock
.
yellow-
brown
green
Note: The insulating tube should be connected reliably with
the sleeve outside the outlet pipe. The drain hose should be
slanted downward slightly, without distortion, bulge or
fluctuation. Do not put the outlet in the water.
bulge
distortion
Flooded
